Strict Adherence to International ASTM & API Standards
At Avimann Lubricants Pvt. Ltd. (Brand: MAX LUBOL), quality is not a department — it is the core foundation of our entire manufacturing operation. Formulated by AVIMANN LUBRICANTS PVT. LTD., our lubricant blending processes are certified under ISO 9001:2015 with international accreditation from IAF and EIAC.
Our registered scope encompasses the formulation, blending, filling, and distribution of Automotive Engine Oils, Heavy Commercial Diesel Engine Oils, Industrial Hydraulic Fluids, Extreme Pressure Gear Lubricants, High-Temperature Greases, and Radiator Coolants.
ISO 9001:2015
Certificate Number: 20DQGK90
Udyam MSME
Registration: UP50A0018083
IAF & EIAC
International Conformity
ROHS Compliant
Environmentally Responsible
AVIMANN LUBRICANTS PRIVATE LIMITED
Registered Office: 365/259 Mohammadganj, Saadatganj, Lucknow - 226003, UP, India
Conforms to the Requirements of ISO 9001:2015 for:
- Manufacturing & Trading of high performance Industrial Oils and Heavy Greases.
- Automotive Engine Oils: 4-Stroke bike oils, 15W50 Bullet oils, 10W-30 synthetic, 5W-30 PCMO, 15W-40 DEO.
- Gear & Transmission Fluids: EP-90, 80W90 API GL-4 and API GL-5 Hypoid gear oils.
- Hydraulic Fluids & Coolants: Anti-wear AW-68, AW-46, Avitrol Green coolant & brake fluids.
Our 7-Stage Batch Quality Testing Protocol
Before any bottle, bucket, or 210L drum is released from our Lucknow blending facility, it must pass all 7 comprehensive ASTM laboratory benchmarks.
Kinematic Viscosity
Measured precisely at 40°C and 100°C via calibrated viscometers to verify exact SAE viscosity grades (e.g. 20W40, 15W40, 5W-30).
Flash Point Test
Cleveland Open Cup (COC) tested above 220°C to guarantee exceptional safety and zero premature oil vaporisation under severe engine loads.
Pour Point Analysis
Verified down to sub-zero temperatures (up to -30°C for synthetic 5W-30) to facilitate effortless winter morning starting with instantaneous oil circulation.
Total Base Number (TBN)
High alkaline reserve titration to ensure our commercial diesel oils actively neutralize acidic combustion by-products and prevent engine corrosion.
Copper Strip Corrosion
ASTM D130 tested to achieve Grade 1A classification, guaranteeing that synchronizers, bronze bushings, and bearing alloys remain totally pristine.
Anti-Foam Stability
Tested under high aeration rates to guarantee zero foam formation in high-RPM motorcycle crankcases and high-pressure hydraulic pumps.
Four-Ball Anti-Wear Test
Validates EP (Extreme Pressure) performance under extreme boundary contact pressures, ensuring gear teeth and cams never pit or weld.
Why Max Lubol Insists on 100% Virgin Base Stocks
Understand the stark difference between Max Lubol's pure virgin formulations and low-cost recycled alternatives found in the aftermarket.
| Performance Metric | MAX LUBOL (100% Virgin Group II/III) | Recycled / Re-Refined Market Oils |
|---|---|---|
| Base Oil Origin | Pure Virgin Hydrocracked Base Oils | Reprocessed Used Crankcase Drains |
| Thermal Breakdown Temp | 220°C - 260°C (High Heat Resistance) | < 180°C (Rapid Vaporisation & Black Sludge) |
| Viscosity Index Stability | High Viscosity Index (HVI) > 115 | Poor (< 90), thins out severely under heat |
| Sulfur & Contaminant Content | Near Zero (< 0.03%), Low ash, clean burning | High residual sulfur, acids, and metal debris |
| Clutch & Gearbox Protection | JASO MA2 friction control, zero clutch slippage | Causes wet clutch chatter and gear pitting |
| Engine Drain Interval | Extended (Up to 10,000+ km for DEO) | Degrades within 2,000 km |